防静电无尘产品制造商 | 天瑞静电科技
中文版        
 
News
新闻分类
详细信息
How to choose ESD gloves?

There are many varieties of ESD gloves ,such as ESD polyester gloves,ESD carbon gloves,ESD copper gloves, should be based on the selection of protective functions. First, the object of protection should be clear, and then carefully choose. Should be based on the choice of solvent exposure category, such as acid gloves, there is resistant to acid (base), there are only resistant to low concentrations of acid (base) ; Resistant to organic solvents and chemical reagents; There penetration resistance and resistance to erosion, and some solvents are harmful to humans can not be directly connected Touch and therefore can not be used indiscriminately, to avoid accidents.
1
Cleanroom Latex gloves only applies to the weak acid, the acid concentration is not high class and a variety of salts, or general oil and other industrial oils, no contact with strong oxidizing agents
(Concentrated sulfuric acid, nitric acid, etc.). ; Resistant to organic solvents and chemical reagents; There penetration resistance and resistance to erosion, and some solvents are harmful to humans can not be directly connected,touch and therefore can not be used indiscriminately, to avoid accidents.
2
Rubber, plastic and other non-disposable ESD gloves after use clean, dry, avoid the sun during high-temperature preservation, stored in
Ventilated place and sprinkle talcum powder to prevent sticking on the products.
3
Insulated gloves should be regularly inspected electrical insulation properties, non-compliance can not be used.
4
ESD gloves and insulated gloves are not the same, anti-static gloves should be worn with bare hands, to keep the body and the gloves and the ground connection touch.
5
Resistance to penetration, acid gloves before use should be carefully examined, whether to observe the surface is damaged, take the easy way is to hand,blowing kit, hand clenched looper, police protection concept leaks. If the leak can not be used.
6
Contact with strong oxidizing acids such as nitric acid, chromic acid, etc., due to strong oxidation products can cause brittle, discolored, early damage. High concentration degree of strong oxidizing acids may even cause burning, should be observed.
本文共分 1